Use PowerCLI to determine the ESXi host with the most available RAM
Use PowerCLI To determine the ESXi host with the most available RAM.
Posts
Thin Provision VMs on Workstation Pro using the vmrun Command
Continuing my series on provisioning VMs on workstation pro outside of the GUI, I’ve got a functional script that will create a linked clone using the vmrun command.
It allows you to specify the following options on the command line:
Continue reading “Thin Provision VMs on Workstation Pro using the vmrun Command”
Clone VM in Workstation 15 Pro via REST API using Powershell
After posting yesterday about modifying the parent image to allow for hostname changes, I was still looking for something a little more streamlined. I remember reading about the new REST API that is available on workstation, so I wrote a little script to use the Workstation API to clone a VM.
Continue reading “Clone VM in Workstation 15 Pro via REST API using Powershell”
Prompt For A New Hostname on Boot
I’ve been brushing up on a few technologies in my home lab, and have found myself using VMware workstation for some simple tasks that don’t require a whole virtualized environment. Workstation didn’t set the hostname of my Ubuntu 18.xx VMs properly after they booted. Maybe I’m a little spoiled by guest OS customization or missing something, but either way, I needed a way to quickly spin up a whole VM and have it’s hostname set correctly. It’s definitely not the cleanest, and I realize I would be better off using the Workstation Pro REST API, but I’m not there yet.
Set Up A Headless Raspberry Pi
I find myself setting up Raspberry Pi’s more frequently than I’d like. I never ever have a monitor connected. Below is the method I use to get wireless network connectivity without connecting an Ethernet cable or a monitor and keyboard. This is here because I’m tired of sifting through incorrect articles to find this information.
Reboot! (Welcome to VirtJunkie!)
It’s been 4 years since my last post – wow!
Welcome to VirtJunkie! As the name implies, I want a place to write about things I’m looking at or am interested in relating to Virtualization (and automation).
A lot has changed for me since my last post. Shortly after my last post, I started working for a large Swiss bank that prohibited me from contributing to a blog. I left that company and spent 3 years at Solarwinds where I should have been contributing to this blog more, but I didn’t. It’s my goal here to provide high quality, relevant content.
Anyhow, I’m back! I’ve got a new domain, a new job (I work for PCM as a solutions architect) where I specialize in Core Datacenter technology.
Stay tuned – I’m about to be much more active here.
VMware Powercli – Gather NIC Driver and Firmware Versions from Hosts via vCenter
I recently encountered an issue in vSphere 5.5 where I wasn’t able to change the interface speed on an ESXi host from auto-negotiate to anything else. After a good amount of troubleshooting I was able to determine that this issue was occurring due to the fact that the NIC firmware version and driver version on a blade server was out of date. VMware has a good KB article on how to grab the firmware and driver versions that I followed. However, the problem is that even on the most modest ESXi host that isn’t running 10G to it, you’ll likely have a minimum of 4 NICs on it. This means that you’ll have to enable SSH on every host you want to check, run one command per NIC each of them (or run a one line script that loops through them, but will that really save you time..?). It doesn’t take a very large cluster for that to become a very large endeavor.
This PowerShell script will connect to a vCenter server, allow you to scan all ESXi hosts, or only hosts within a particular cluster, and output the results in object format so that you can manipulate them how you wish.
Continue reading “VMware Powercli – Gather NIC Driver and Firmware Versions from Hosts via vCenter”
Use VMware PowerCLI to Pull CDP information from ESXi Hosts
I like having documentation, but I hate creating documentation. I’ll be the first to admit that I’m slightly lazy at times, however, my own personal preferences for what I’ll call “Effort Allocation”, are not the root of my dislike for creating documentation. The issue really stems from the fact that creating it is very time consuming, tedious, and usually lower on the priority list.
However, sometimes it’s not you that failed to create the documentation. Consultants frequently fall into this category.
The issue I’m handling here is documenting CDP information from the perspective of ESXi hosts using PowerCLI.
Continue reading “Use VMware PowerCLI to Pull CDP information from ESXi Hosts”
Modify DNS Records via Powershell
Over the past few months I’ve been doing a lot of work with VMware Horizon 6. I’m not going to go into details, as VMware has done a great job doing that, plus I’m under a NDA. Suffice to say, details that have been provided suffice if you’re just looking for info.
In my company sponsored lab environment, I have HWS 1.8 deployed in feature/option parity compared to production. Deploying a second instance of HWS (perhaps a pre-release version), is challenging, due to DNS/Reverse DNS Checks that are done.
Anyways – the reason you’re probably here is to find out how to systematically modify DNS records, so here ya go!
Powershell – Provision NetApp Volume as NFS Datastore to vCenter
For anyone that’s ever been through the process of provisioning a new datastore to multiple ESX hosts, you know it can take some time. Below are the steps I use
- Create Volume on NetApp
- Set Security Style to Unix
- Enable Storage Efficiency
- Set NFS Export permissions to allow Read/Write + Root Permissions to all applicable hosts
- Mount datastores on ESXi hosts
For a handful of hosts this is fine, but adding it to anything more than 4-5 hosts is reaaally painful in my experience. Below is a script you can use to take care of these steps in one swipe.
Continue reading “Powershell – Provision NetApp Volume as NFS Datastore to vCenter”